Seller Guides
How to sell surplus PLC, automation and electrical inventory
What sells, how condition affects value and how to prepare surplus PLC, drive and electrical inventory so a buyer can price the whole lot.
By National Surplus Buyers · · 9 min read

The fastest way to sell surplus automation inventory
To sell surplus PLC, automation and electrical inventory, list every part by catalog number, quantity and condition, add photos of the labels, and send that list to buyers who purchase whole lots. A few high-value parts can sell one at a time online. Clearing a full storeroom, excess and obsolete (E&O) stock or a closing plant usually goes faster as one bulk sale.
Unused spares still cost money. They take storeroom space, hold book value that finance wants resolved and lose value each year a newer series replaces them. This guide is for plant maintenance managers, distributors with E&O stock, system integrators with leftover project parts and OEMs with excess components.
What surplus automation and electrical stock sells
Almost any industrial control part in original packaging, from any manufacturer, has a secondary market. Allen-Bradley, Siemens and Schneider Electric parts are common in surplus lots, along with many more brands. These categories cover most of what plants and distributors hold.
- PLCs and I/O. Processors, chassis, power supplies, digital and analog I/O cards and communication modules. See selling surplus PLCs and I/O modules.
- HMIs. Operator panels, touchscreens and industrial computers.
- Drives and servo. AC and DC drives, servo drives, servo motors and motion controllers. Details on selling surplus drives and VFDs.
- Sensors. Photoelectric and proximity sensors, encoders, safety light curtains and pressure transmitters.
- Breakers and contactors. Circuit breakers, contactors, overload relays, motor starters and control relays, covered in surplus breakers, contactors and electrical components.
- Industrial networking. Managed and unmanaged switches, gateways, protocol converters and network modules.
- MRO spares. Fuses, terminal blocks, pushbuttons, pilot lights and other maintenance parts. See selling MRO spares and storeroom stock.
The full list by product type is under PLC and industrial automation inventory.
How condition affects value
Condition is the first thing a buyer checks after the catalog number. Use the terms buyers use, and apply them line by line rather than to the whole lot.
- New. Current production in original packaging, never installed.
- New old stock. Never installed, but from an earlier production run or an older series. Often stored for years in the original packaging.
- Factory sealed. The original manufacturer seal is intact. Sealed parts give a buyer the most confidence and usually earn the strongest offers.
- Open box. The packaging has been opened, but the part was never installed. Missing manuals, inserts or hardware lower the price.
- Refurbished. Repaired or restored by a repair shop or the manufacturer. Paperwork showing who did the work and when supports the price.
Packaging matters on its own. Crushed cartons, faded labels and torn seals lower an offer even when the part inside is unused. Series letter and firmware revision matter too, because two parts with the same catalog number can fit different installed systems.
Legacy and discontinued series
A discontinued part is not dead stock. Plants keep older control platforms running for years after a manufacturer ends production, and their maintenance teams need spares that are no longer sold new.
That demand makes new old stock of a legacy series worth checking before any write-off or scrap decision. Value depends on how many installed systems still use the platform and how much spare supply is already in the market. Record the exact series and revision so a buyer can price it accurately.
How to build a list a buyer can price
A clear list gets a firmer offer, because the buyer prices what it can verify. Five things matter most.
- Part or catalog numbers. Include the full number with series and revision, exactly as printed on the label.
- Quantities. One line per part number, with the count on hand.
- Condition. New, new old stock, factory sealed, open box or refurbished, marked on each line.
- Photos of labels. Clear shots of the nameplate or carton label, plus a wide photo of each shelf or pallet.
- An ERP or SAP export. A raw inventory export is fine. Buyers can work from your existing columns without a cleaned-up spreadsheet.
Add the site's city and state, whether there is a loading dock and any date the parts must be gone. Those details set the pickup plan.
If parts sit in more than one storeroom, list each location separately. A buyer can then plan one pickup or several and account for freight in the offer.
Storeroom clean-outs, plant closures and E&O stock
Most automation surplus comes from a few common situations. A line upgrade or platform migration leaves a storeroom full of spares for equipment that no longer runs. A plant closure puts every part in the building on a deadline.
Distributors carry excess and obsolete stock after a manufacturer changes a product line or a large order is cancelled. System integrators hold leftover parts from finished or cancelled projects. OEMs end up with excess components after a design change or a lower build forecast.
In each case, selling the storeroom as one lot clears the space and settles the book value at once. For a broader look at the options, read our guide to selling excess inventory.
Selling one part at a time versus one bulk sale
Listing parts individually online can return a higher price per unit, especially for sealed, current parts in steady demand. The cost is your time. Each listing needs photos, a description, answers to buyer questions, packing, shipping and handling any returns. Technical questions about compatibility and firmware also pull maintenance staff away from the plant floor.
Selling to a bulk buyer returns a lower price per unit, because the buyer takes on the resale risk and the time to sell. In return, the whole lot sells in a single transaction. Slow-moving parts leave with the fast ones instead of staying on your shelf.
Many sellers do both. They sell a handful of high-value parts themselves and sell the remaining lot to a bulk buyer. Compare the net result of each option after fees, freight, labor and storage, not the listed prices.
What to ask any buyer
Before you accept an offer, get clear answers on these points from every buyer you consider.
- Outright purchase. Confirm the buyer pays for the lot rather than selling it on consignment.
- Whole-lot pricing. Ask for one price covering every line, so you are not left with the slowest parts.
- A written offer. Get the price, the included lines and the terms in writing.
- Pickup. Confirm who arranges and pays for pickup, and how the parts will be loaded.
- Payment timing. Agree on when payment arrives relative to pickup.
- Resale restrictions. Distributors and OEMs often have channel or territory terms. Ask the buyer to agree to them in writing.
- Confidentiality. Confirm the sale and your company name stay private.
Sell your automation surplus to us
Sell us surplus PLC, automation and electrical inventory in new, new old stock, factory sealed, open box or refurbished condition, including legacy and discontinued models. Lots can range from a few boxes or a pallet to full truckloads, but we don't buy single items.
Send your list, ERP export or label photos, and you get our written offer within 48 hours, with no obligation to accept. Accept it for fast payment, with pickup arranged nationwide. We honor written resale or channel restrictions, and every sale stays confidential.
To see each step first, read how the selling process works. When your list is ready, request a written offer.
Frequently asked questions
Can I sell discontinued PLCs and drives?
Yes. Discontinued and legacy PLCs, drives and modules often still have buyers, because plants keep older platforms running long after production ends. We buy legacy and discontinued models in new, new old stock, factory sealed, open box or refurbished condition. Include the full catalog number, series and revision on your list.
What does new old stock mean for automation parts?
New old stock means parts that were never installed but come from an earlier production run or an older series. They are often stored for years in the original packaging. Value depends on demand for that series and on packaging condition, so photograph the labels and cartons when you list them.
Do I need a full inventory list to get an offer?
No. A raw ERP or SAP export works, and so does a simple spreadsheet with catalog numbers, quantities and condition. If you have neither, clear photos of the part labels and shelves are enough to start. More detail produces a firmer price, and you get a written offer within 48 hours.
Can I restrict where my surplus parts are resold?
Yes, as long as you put any channel, territory or marketplace restrictions in writing before you accept an offer. Distributors with authorized supply agreements and OEMs protecting their pricing use these terms often. We honor written resale or channel restrictions and keep every sale confidential. Restrictions can narrow the resale market, which may affect the offer.

